What’s Included

  • Timber Frame shop diagrams
  • Engineering review & seal of Timber Frame shop diagrams for permit (Engineer licensed in Canada)
  • Eastern White Pine Interior Timber Frame package as per timber frame diagrams
  • Eastern White Pine Exterior Timber Frame Components including porch posts, beams and knee braces, as well as decorative gable details as per timber frame diagrams.
  • All standard timber to timber connectors (lag bolts, washers, RSS screws, oak pegs)
  • 1×6 Pine Tongue & Groove pine for the “cathedral” ceiling of the Interior Timber Frame structure
  • 1×6 T&G for 1st floor ceiling above Timber Frame of kitchen on Ashland & Limberlost models only
  • Structural Insulated Panels (SIPs) for walls Pre-cut 6 ½” (R23) as per panel diagram(s)
  • Structural Insulated Panels (SIPs) for roof Pre-cut 10 ¼” (R37) as per panel diagram(s)
  • All required OSB splines, panel screws, washers and sealant
  • Panel shop diagrams
  • Dens Armor (or similar) drywall for wall panels (interior side of SIP’s )
  • 2x dimensional lumber and/or structural lumber required for SIP panel pre-assembly and install
  • Roof over framing and Ventilation
  • Caulking & sealants

Interior & Exterior Timber Frame Specifications

  • Interior & Exterior Timber material Eastern White Pine #2 Grade and better, green unseasoned
  • Timber frame material is surface planed and cleaned
  • Timbers supplied with square edges (no chamfers), straight knee braces (not curved)
  • Interior Timber material will be finished with 1 coat of clear Danish oil (unless notified otherwise)
  • Exterior Timber material will be “unfinished” NO exterior stain or finish applied
  • T&G will be pre-finished with 1 coat of clear Natural Danish Oil
  • T&G for flat ceilings, 1st floor ceilings, basement and/or Exterior are not included
  • Tech Rep will coordinate the pre-assembly and install of Interior Timber Frame, Tongue & Groove Pine ceilings Structural Insulated Panels
  • Tech Rep will be available for 1-3 days depending on selected items and Model

Note: Engineer inspection of Timber Frame after Install is not included – billed as an extra if requested frame diagram(s)

Timber Frame hybrid Installation Option

  • Supply labor for the Interior Timber Frame, Cathedral Roof T&G, DensArmor Drywall and/or Wall & Roof Panel Install
  • Manufacturer will supply the labor to coordinate the pre-assembly and install of Interior Timber frame, Tongue & Groove 1”x 6” and/or Structural Insulated Panels (SIPs)
  • Crew will install DensArmor Drywall on the Wall Panels prior to Panel install
  • Install Crew will be on site for 1-15 days depending on selected items and Model
  • Install of Exterior timber components is not included at this time (Porches, gable details etc. are typically installed by others at a later date)
  • Site inspection may be required prior to installation – to assess any site or access issues

Other Options

  • Upgrade to Douglas Fir and/or Western Red Cedar timbers
  • Add chamfering to timbers and knee braces
  • Upgrade to curved knee braces
  • Staining timbers:
    • Change from Danish oil on the interior timbers
    • Stain the exterior timbers

Package Exclusions

Due to variance from site to site the following items are not included and will be priced specific to your home site:

  • Excavation and site work
  • Well
  • Septic
  • Building Permit
  • Landscaping
  • Foundation and basement
  • Kitchen Appliances – fridge, stove, dishwasher, over-the-range microwave, washer, dryer
  • New Home Warranty is optional
Back to Top